M. Jover, M. A. Barranco, J. A. Naranjo, J. Proenza, A. Ballesteros. Characterizing the Tradeoff between Fault Tolerance and Cost of Redundant TSN Networks. In 29th International Conference on Emerging Technologies and Factory Automation (ETFA24), Padova, Italy, 2024.

J. Evangelisti, M. A. Barranco, J. Proenza, A. Ballesteros, M. Jover. Towards a Node Active Replication Schema for Highly Reliable Distributed Control Systems Based on TSN. In 29th International Conference on Emerging Technologies and Factory Automation (ETFA24), Padova, Italy, pp. 1-4, 2024.

M. Jover, A. Ballesteros, M. A. Barranco, J. Proenza. Mapping IEC 61850 GOOSE messages into Time-Sensitive Networking. In 29th International Conference on Emerging Technologies and Factory Automation (ETFA24), Padova, Italy, pp. 1-4, 2024.

M. Jover, M. A. Barranco, J. Proenza. Opportunities and Specific Plans for Migrating from PRP to TSN in Substation Automation Systems. In Proceedings of the IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA 2023), Sinaia, Romania, pp. 1-4, 2023.

A. Ballesteros, J. Proenza, M. A. Barranco. Adding Flexibility to Node-Level Fault Tolerance in Distributed Embedded Systems Based on Real-Time Ethernet. Universitat de les Illes Balears, 2023.

M. Jover, I. Álvarez, M. A. Barranco. A Toolchain for Scheduling Legacy Ethernet-Based Traffic into TSN Networks with Spatial and Time Redundancy. University of the Balearic Islands, M. Sc. Thesis, 2022.

A. Ballesteros, M. A. Barranco, J. Proenza, L. Almeida, F. Pozo, P. Palmer-Rodríguez. An Infrastructure for Enabling Dynamic Fault Tolerance in Highly-Reliable Adaptive Distributed Embedded Systems Based on Switched Ethernet. In Sensors, MDPI, vol. 22, no. 18, December, 2022 .

M. Jover, M. A. Barranco, I. Álvarez, J. Proenza. Migrating Legacy Ethernet-Based Traffic with Spatial Redundancy to TSN networks. In Proceedings of the IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA 2022), Stuttgart, Germany, pp. 1-8, 2022 .

I. Álvarez, I. Furió, J. Proenza, M. A. Barranco. Design and Experimental Evaluation of the Proactive Transmission of Replicated Frames Mechanism over Time-Sensitive Networking. In Sensors, MDPI, vol. 21, no. 3, January, 2021 .

I. Álvarez, J. Proenza, M. A. Barranco. Time Redundancy Mechanisms for Tolerating Temporary Faults in the Communication Subsystem of Systems based on Time-Sensitive Networking Standards. University of the Balearic Islands, Ph. D. Thesis, 2021.

I. Álvarez, M. A. Barranco, J. Proenza. Dataset: Reliability Sensitivity Analyses of TSN and PTRF in the presence of temporary faults.

I. Álvarez, M. A. Barranco, J. Proenza. Reliability Analysis of the Proactive Transmission of Replicated Frames Mechanism over Time-Sensitive Networking. In Sensors, MDPI, vol. 21, no. 24, December, 2021 .

M. A. Barranco, S. Derasevic, J. Proenza. An Architecture for Highly Reliable Fault-Tolerant Adaptive Distributed Embedded Systems. In Computer, vol. 53, no. 3, pp. 38-46, March, 2020 .

I. Álvarez, A. Ballesteros, M. A. Barranco, D. Gessner, S. Derasevic, J. Proenza. Fault Tolerance in Highly-Reliable Ethernet-based Industrial Systems. In Proceedings of the IEEE, vol. 107, no. 6, pp. 977-1010, June, 2019 .

D. Gessner, J. Proenza, M. A. Barranco, A. Ballesteros. A Fault-Tolerant Ethernet for Hard Real-Time Adaptive Systems. In IEEE Transactions on Industrial Informatics, IEEE, vol. 15, no. 5, pp. 2980 - 2991, May, 2019 .

A. Ballesteros, J. Proenza, M. A. Barranco, L. Almeida, P. Palmer-Rodríguez. First Description of a Self-Reconfigurable Infrastructure for Critical Adaptive Distributed Embedded Systems. May, 2019.

I. Álvarez, M. A. Barranco, J. Proenza. Towards a Fault-Tolerant Architecture based on Time-Sensitive Networking. In 4ª Edición de las Jornadas de ACM Celebrations: Informática para tod@s, A Coruña, Spain, 2019.

A. Ballesteros, M. A. Barranco, S. Arguimbau, M. Costa, J. Proenza. Towards a Dynamic Replication of Messages in a Network with Flexible Real-Time Guarantees. In 17th International Workshop on Real-Time Networks (RTN 2019), Stuttgart, 2019.

I. Álvarez, D. Cavka, J. Proenza, M. A. Barranco. Simulation of the Proactive Transmission of Replicated Frames Mechanism over TSN. In Proceedings of the IEEE 24th International Conference on Emerging Technologies and Factory Automation (ETFA 2019), Zaragoza, 2019.

T. Jorda, I. Álvarez, M. A. Barranco. Design, Implementation and Validation of a System to Automatically Configure the Scheduling of Real-Time Traffic in Time Sensitive Networking (TSN) Switches. Universitat de les Illes Balears, 2019.

D. Bujosa, S. Arguimbau, P. Arguimbau, J. Proenza, M. A. Barranco. Formal Verification of the FTTRS Mechanisms for the Consistent Update of the Traffic Schedule. In Proceedings of the IEEE 24th International Conference on Emerging Technologies and Factory Automation (ETFA 2019), Zaragoza, 2019.

A. Ballesteros, M. A. Barranco, S. Arguimbau, M. Costa, J. Proenza. Temporal Replication of Messages for Adaptive Systems using a Holistic Approach. In Proceedings of the IEEE 24th International Conference on Emerging Technologies and Factory Automation (ETFA 2019), Zaragoza, 2019.

I. Álvarez, M. A. Barranco, J. Proenza. Towards a Fault-Tolerant Architecture based on Time Sensitive Networking. In Proceedings of the IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA 2018), Torino, 2018.

I. Álvarez, J. Proenza, M. A. Barranco. Mixing Time and Spatial Redundancy over Time Sensitive Networking. In Proceedings of the 48th Annual IEEE/IFIP International Conference on Dependable Systems and Networks, Luxemburg, 2018.

I. Álvarez, D. Cavka, J. Proenza, M. A. Barranco. First Study of the Proactive Transmission of Replicated Frames Mechanism over TSN. In 16th International Workshop on Real-Time Networks (RTN 2018), Barcelona, 2018.

A. Ballesteros, J. Proenza, M. A. Barranco, L. Almeida, P. Palmer-Rodríguez. Towards a Self-Reconfigurable Infrastructure for Critical Adaptive Distributed Embedded Systems. In 16th International Workshop on Real-Time Networks (RTN 2018), Barcelona, 2018.

S. Derasevic, M. A. Barranco, J. Proenza. Node Fault Tolerance for Distributed Embedded Systems based on FTT-Ethernet. University of the Balearic Islands, 2018.

D. Bujosa, S. Arguimbau, P. Arguimbau, J. Proenza, M. A. Barranco. Verification of the Schedule Consistent Update Mechanisms of FTTRS with UPPAAL. In 16th International Workshop on Real-Time Networks (RTN2018), Barcelona, 2018.

A. Ballesteros, J. Proenza, M. A. Barranco, L. Almeida. Reconfiguration Strategies for Critical Adaptive Distributed Embedded Systems. In Proceedings of the 48th Annual IEEE/IFIP International Conference on Dependable Systems and Networks (DSN 2018), Luxembourg, 2018.

D. Bujosa, M. A. Barranco. Diseño, implementación y evaluación cuantitativa del rendimiento de un prototipo mejorado de una nueva red de comunicaciones para sistemas de control distribuidos llamada Highly Discriminating Monitoring Star for CAN (HDMS-CAN). Universitat de les Illes Balears, Palma de Mallorca, 2017.

I. Álvarez, J. Proenza, M. A. Barranco, M. Knezic. Towards a Time Redundancy Mechanism for Critical Frames in Time-Sensitive Networking. In Proceedings of the 22nd IEEE International Conference on Emerging Technologies And Factory Automation (ETFA 2017), Cyprus, 2017.

D. Gessner, J. Proenza, M. A. Barranco. Adding Fault Tolerance To a Flexible Real-Time Ethernet Network for Embedded Systems. University of the Balearic Islands, 2017.

A. Ballesteros, J. Proenza, M. A. Barranco. Implementation and Testing of the Node Replication Scheme of the FT4FTT Architecture. Universitat de les Illes Balears, 2016.

A. Ballesteros, S. Derasevic, D. Gessner, F. Font, I. Álvarez, M. A. Barranco, J. Proenza. First Implementation and Test of a Node Replication Scheme on top of the Flexible Time-Triggered Replicated Star for Ethernet. In Proceedings of the 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, 2016.

S. Derasevic, M. A. Barranco, J. Proenza. Designing fault-diagnosis and reintegration to prevent node redundancy attrition in highly reliable control systems based on FTT-Ethernet. In Proceedings of the 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, 2016.

A. Ballesteros, S. Derasevic, M. A. Barranco, J. Proenza. First Implementation and Test of Reintegration Mechanisms for Node Replicas in the FT4FTT Architecture. In Proceedings of the 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, 2016.

M. A. Barranco, A. Zendouh, A. Ballesteros, J. Proenza. Improving Maintenance of FT4FTT: Extending it to Monitor and Log its Available Redundancy via Internet. In Proceedings of the 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.

S. Derasevic, M. Melià, A. Ballesteros, M. A. Barranco, J. Proenza. First Experimental Evaluation of the Consistent Replicated Voting in the Hard Real-Time Ethernet Switching architecture. In Proceedings of the 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015), Luxemburg, 2015.

S. Derasevic, M. A. Barranco, J. Proenza. An OMNET++ model to asses node fault-tolerance mechanisms for FTT-Ethernet DESs. In Emerging Technology and Factory Automation (ETFA), 2015 IEEE , Luxembourg, 2015.

M. A. Barranco, J. Proenza, L. Almeida. Quantitative characterization of the reliability of simplex buses and stars to compare their benefits in fieldbuses. In Reliability Engineering & System Safety, ELSEVIER, vol. 142, pp. 163–175, June , 2015.

D. Gessner, M. A. Barranco, A. Ballesteros, J. Proenza. sfiCAN: a Star-based Physical Fault-Injection Infrastructure for CAN networks. In IEEE Transactions on Vehicular Technology, IEEE, vol. 63, no. 3, pp. 1335-1349, March, 2014 .

D. Gessner, J. Proenza, M. A. Barranco. A Proposal for Master Replica Control in the Flexible Time-Triggered Replicated Star for Ethernet. In Proceedings of the 10th IEEE International Workshop on Factory Communication Systems (WFCS 2014), Toulouse, France, 2014.

D. Gessner, J. Proenza, M. A. Barranco. A Proposal for Managing the Redundancy Provided by the Flexible Time-Triggered Replicated Star for Ethernet. In Proceedings of the 10th IEEE International Workshop on Factory Communication Systems (WFCS 2014), Toulouse, France, 2014.

D. Gessner, P. Portugal, J. Proenza, M. A. Barranco. Towards a reliability analysis of the design space for the communication subsystem of FT4FTT. In Proceedings of the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2014), 2014.

D. Gessner, I. Álvarez, A. Ballesteros, M. A. Barranco, J. Proenza. Towards an Experimental Assessment of the Slave Elementary Cycle Synchronization in the Flexible Time-Triggered Replicated Star for Ethernet. In Proceedings of the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2014), Barcelona, Spain, 2014.

M. A. Barranco, F. Pozo, J. Proenza. A Model for Quantifying the Reliability of Highly-Reliable Distributed Systems based on Fieldbus Replicated Buses. In Proceedings of the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2014), Barcelona, Spain, 2014.

S. Derasevic, M. A. Barranco, J. Proenza. Appropriate consistent replicated voting for increased reliability in a node replication scheme over FTT. In Proceedings of the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2014), Barcelona, Spain, 2014.

S. Derasevic, J. Proenza, M. A. Barranco. Using FTT-Ethernet for the coordinated dispatching of tasks and messages for node replication. In Proceedings of the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2014), Barcelona, Spain, 2014.

I. Álvarez, J. Proenza, M. A. Barranco. Implementation and Verification of the Slave Elementary Cycle Synchronization Mechanism of the Flexible Time-Triggered Replicated Star for Ethernet. Universitat de les Illes Balears, 2014.

F. Pozo, M. A. Barranco, J. Proenza. Modelado mediante Stochastic Activity Networks (SANs) de la Fiabilidad de un Sistema Distribuido en el que los nodos se comunican a través de una red con Topología de Bus Replicado basada en el protocolo Controller Area Network (CAN). Universitat de les Illes Balears, 2014.

D. Gessner, M. A. Barranco, J. Proenza. Design and verification of a media redundancy management driver for a CAN star topology. In IEEE Transactions on Industrial Informatics, IEEE, vol. 9, no. 1, pp. 237-245, February, 2013 .

D. Gessner, J. Proenza, M. A. Barranco, L. Almeida. Towards a Flexible Time-Triggered Replicated Star for Ethernet. In Proceedings of the 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2013), Cagliari, Italy, 2013.

A. Ballesteros, D. Gessner, J. Proenza, M. A. Barranco, P. Pedreiras. Towards Preventing Error Propagation in a Real-Time Ethernet Switch. In Proceedings of the 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2013), Cagliari, Italy, 2013 .

L. Almeida, Z. Iqbal, P. Pedreiras, R. Marau, L. Silva, M. Ashjaei, M. Behnam, T. Nolte, J. Proenza, M. A. Barranco, D. Gessner, G. Rodríguez-Navas, A. Ballesteros, S. Derasevic. Developments in Flexible Time-Triggered Switched Ethernet. In Workshop on Real-Time Ethernet (RATE 2013) in conjunction with RTSS 2013, 2013.

A. Ballesteros, D. Gessner, M. A. Barranco, J. Proenza. Diseño de sfiCAN: un inyector físico de fallos para redes CAN basado en una topología en estrella. June, 2012.

J. Proenza, M. A. Barranco, G. Rodríguez-Navas, D. Gessner, F. Guardiola, L. Almeida. The design of the CANbids architecture. In Proceedings of the 17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2012), Kraków, Poland, 2012.

D. Gessner, M. A. Barranco, J. Proenza, M. Short. A first qualitative evaluation of star replication schemes for FTT-CAN. In Proceedings of the 17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2012), Kraków, Poland, 2012.

J. Proenza, M. A. Barranco, J. Llodrà, L. Almeida. Using FTT and stars to simplify node replication in CAN-based systems. In Proceedings of the 17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2012), Kraków, Poland, 2012.

M. A. Barranco, J. Proenza. Developing TOBE-CAN: Total Order Atomic Broadcast Enforcement in CAN. In Proceedings of the 17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2012), Kraków, Poland, 2012.

A. Ballesteros, J. Proenza, M. A. Barranco. Construction of sfiCAN: a star-based fault-injection infrastructure for the Controller Area Network. Universitat de les Illes Balears, 2012.

M. A. Barranco, J. Proenza. Towards Understanding the Sensitivity of the Reliability Achievable by Simplex and Replicated Star Topologies in CAN. In Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011.

D. Gessner, M. A. Barranco, A. Ballesteros, J. Proenza. Designing sfiCAN: a star-based physical fault injector for CAN. In Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011.

M. A. Barranco, G. Rodríguez-Navas, D. Gessner, J. Proenza. Towards the Integration of Flexible-Time-Triggered Communication and Replicated Star Topologies in CAN. In Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011.

D. Gessner, J. Proenza, M. A. Barranco. Design and verification by means of model checking of reCANdrv: a media redundancy management driver for the nodes of a ReCANcentrate network. Universitat de les Illes Balears, 2011.

M. A. Barranco, J. Proenza, L. Almeida. Quantitative comparison of the error-containment capabilities of a bus and a star topology in CAN networks. In IEEE Transactions on Industrial Electronics, vol. 58, no. 3, pp. 802--813, March, 2011 .

M. A. Barranco, J. Proenza, L. Almeida. Improving error containment and reliability of communication subsystems based on controller area network (CAN) by means of adequate star topologies. Universitat de les Illes Balears, 2010.

M. A. Barranco, D. Gessner, J. Proenza, L. Almeida. First prototype and experimental assessment of media management in ReCANcentrate. In Proceedings of the 15th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2010), Bilbao, Spain, 2010.

M. A. Barranco, J. Proenza, L. Almeida. Reliability Improvement Achievable in CAN-based Systems by Means of the ReCANcentrate Replicated Star Topology. In Proceedings of the 8th IEEE Workshop on Factory Communication Systems (WFCS 2010), Nancy, France, 2010.

D. Gessner, M. A. Barranco, J. Proenza, L. Almeida. Evaluation of different approaches for the media management in ReCANcentrate nodes. July, 2010.

D. Gessner, J. Proenza, M. A. Barranco. Construction of a Hardware Prototype of ReCANcentrate and Implementation of a Media Management Driver for the Nodes of the Prototype. Universitat de les Illes Balears, 2010.

J. Pimentel, J. Proenza, L. Almeida, G. Rodríguez-Navas, M. A. Barranco, J. Ferreira. Dependable Automotive CAN Networks. In Handbook on Automotive Embedded Systems, CRC Press, Nicolas Navet and Françoise Simonot-Lion , pp. 6-(1-51), 2009.

M. A. Barranco, J. Proenza, L. Almeida. First quantitative results of the dependability improvement achieved by ReCANcentrate. In Proceedings of the 14th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2009), Palma de Mallorca, Spain, 2009.

M. A. Barranco, D. Gessner, J. Proenza, L. Almeida. Demonstrating the feasibility of media management in ReCANcentrate. In Proceedings of the 14th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2009), Palma de Mallorca, Spain, 2009.

M. A. Barranco, J. Proenza, L. Almeida. Boosting the Robustness of Controller Area Networks: CANcentrate and ReCANcentrate. In Computer, vol. 42, no. 5, pp. 66--73, May, 2009.

M. A. Barranco, J. Proenza, L. Almeida. Management of Media Replication in ReCANcentrate. In International CAN Conference (iCC), 2008.

M. A. Barranco, J. Proenza, L. Almeida. Maintaining data consistency in ReCANcentrate during hub decouplings. In IEEE Workshop on Factory Communication Systems (WFCS), Dresde (Germany), 2008.

M. A. Barranco, J. Proenza, L. Almeida. Designing and Verifying Media Management in ReCANcentrate. In IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Hamburg (Germany), 2008.

M. A. Barranco, J. Proenza, L. Almeida. Experimental assessment of ReCANcentrate, a replicated star topology for CAN. In SAE 2006 Transactions Journal of Passenger Cars: Electronic and Electrical Systems, SAE international, pp. 437--446, 2007.

M. A. Barranco, J. Proenza, L. Almeida. Enhancing the response of ReCANcentrate in presence of faults. 2007.

M. A. Barranco, J. Proenza, L. Almeida. On the Management of Media Replication in ReCANcentrate. 2007.

M. A. Barranco, J. Proenza, L. Almeida. First results of the assessment of the improvement of error containment achieved by CANcentrate. In IEEE International Workshop on Factory Communication Systems (WFCS), Torino (Italy), 2006.

M. A. Barranco, J. Proenza, G. Rodríguez-Navas, L. Almeida. An Active Star Topology for Improving Fault Confinement in CAN Networks. In IEEE Transactions on Industrial Informatics, vol. 2, no. 2, pp. 78--85, 2006.

M. A. Barranco, J. Proenza, G. Rodríguez-Navas, L. Almeida. Pushing error containment and fault tolerance. In CAN Newsletter. Special Edition on Automotive Networks, CAN in Automation GmbH, 2006.

M. A. Barranco, L. Almeida, J. Proenza. ReCANcentrate: A replicated star topology for CAN networks. In IEEE Conference on Emerging Technologies and Factory Automation (ETFA), Catania (Italy), 2005.

M. A. Barranco, J. Proenza, G. Rodríguez-Navas, L. Almeida. A CAN hub with Improved Error Detection and Isolation. In International CAN Conference (iCC), 2005.

M. A. Barranco, J. Proenza, G. Rodríguez-Navas, L. Almeida. Design and implementation of CANcentrate: an active star topology for improving fault confinement in CAN networks. 2005.

M. A. Barranco, G. Rodríguez-Navas, J. Proenza, L. Almeida. CANcentrate: An Active Star Topology for CAN Networks. In IEEE International Workshop on Factory Communication Systems (WFCS), Vienna (Austria), 2004.

G. Rodríguez-Navas, M. A. Barranco, J. Proenza, I. Broster. COTS-based Hardware Support to Timeliness in CAN Networks. In IEEE International Conference on Emerging Technology and Factory Automation (ETFA), Lisbon (Portugal), 2003.